Reducer application specification model

Reducing tube is also called the size of the first, both ends of the nozzle diameter is different, for connecting different diameter pipe or Flange to change. Concentric reducer tube at both ends of the nozzle, the center of the circle in the same axis, when the diameter to calculate the pipe position, then the pipe position unchanged, generally used for gas or vertical liquid pipe diameter. At the same time, the effect of energy-saving emission reduction is more significant, the use of different diameter close-up technology water heater machine thermal efficiency of up to 73%, both energy saving, coal saving, but also reduce carbon dioxide emissions. Eccentric reducer tube at both ends of the nozzle circumference within the cut, generally used for horizontal liquid pipe.
According to the actual flow of their own pipeline corresponding to the flow of the table to select the corresponding caliber specifications of the flow meter, as far as possible with the same diameter of the process pipe flow meter. Eccentric reducer tube cut point when the point up, known as the top of the installation, generally used for pump inlet, conducive to exhaust, cut down into the bottom of the flat installation, generally used to adjust the valve installation, the use of row net. The concentric reducer is conducive to fluid flow and less interference to the fluid flow when the diameter is reduced, so the gas and vertical flow of the liquid pipe are reduced using a concentric reducer.

First, the performance of the reducer

Reducing tube is a kind of tube, reducer if the diameter of the selected pipe and the diameter of the process does not match, should be the corresponding reduction or diameter processing.
1, different diameter pipe material, including stainless steel reducer (304304l316316l), alloy steel, different diameter carbon steel head, reducer 20 steel q234q345 and so on.
2, manufacturing standards: GB / T12459, GB / T13401, HG / T21635, HG / T21631, SY5010, SH3408, SH3409, ASME / ANSI, B16.9 JIS B2311 / 2312/2313, DIN2605 / 2615/2616/2617
3, the product features: beautiful appearance, the surface smooth, Naisuan Jian, anti-corrosion, strong texture and strong
4, for media: water, oil, gas and some corrosive liquids, petroleum, chemical, water, electricity, boilers, shipbuilding and other industries.

Second, the application of reducer

1, when the flow of fluid in the pipeline changes, such as increase or decrease, flow rate changes are not required, the need to use reducer.
The following are the same as the "
2, in the pump imports, in order to prevent cavitation, the need for reducer.
The following are the same as the "
3, with the instrument, such as flow meters, control valve joints, in order to meet with the instrument, but also need to use reducer